VND810PTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND810 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 7mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 3.5A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Output Current Flow Direction | SINK |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND810PTR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 16-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 2 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.There are Auto Restart, Status Flag features available on the LED driving board.The VND810 family contains this object.A total of 16 terminations have been recorded.The 16 pins are used for the operation of the system.In order to meet the operation criteria, the maximum output current drops to 3.5A.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 16 pins.In this case, there is 160mOhm resistance in the LED driving board.There is an electrical component included in the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.There is a maximum input voltage of 36V volts.As a minimum input voltage, it requires 5.5V volts.7mA is the maximum current required to operate it.
VND810PTR-E Features
Resistance of 160mOhm
VND810PTR-E Applications
There are a lot of STMicroelectronics VND810PTR-E Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- PC Card Hot Swap
- USB Ports/Hubs
- HDD and SSD
- Wireless Headsets
- HDD, SSD
- USB Power Distribution
- Portable GPS Device
- Hot Swaps
