VND810SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 52W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND810 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 52W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Drain to Source Resistance | 320mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND810SP Overview
It is package in Tube case.The PowerSO-10 Exposed Bottom Pad package contains it.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 2.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.There is a VND810 family of things that it belongs to.It contains 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 3.5A.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 10 pins are present on it.It is included in the VIPower? series.This case results in a 5A output current.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In this case, Vsup (maximum supply voltage) is set to 36V.This part is powered by 8/36V.It is recommended to set the supply voltage to 41V for optimum efficiency.
VND810SP Features
Supplied from 13V
VND810SP Applications
There are a lot of STMicroelectronics VND810SP Power Switches ICs applications.
- USB Power Distribution
- PC Card Hot Swap
- USB3.1 Power Delivery
- PDAs
- Solid State Drivers
- Gaming
- Handheld Devices
- USB Ports/Hubs
- Smartphone and PDA
- Wearable Devices
