VND810SP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 52W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Base Part Number | VND810 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 52W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 3.65mm |
| Length | 7.6mm |
| Width | 9.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND810SP-E Overview
Tube is how it's packaged.Package PowerSO-10 Exposed Bottom Pad contains it.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 2 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.It comes under the family of VND810.There are 10 terminations in it.For operation, we use the 10 pins.As far as functions are concerned, the lighting driver has 2.Maximum output current falls to 3.5A when operation criteria are met.As long as the supply voltage is 13V, high efficiency can be achieved.Surface Mount is mounted in the way.10 pins are equipped with it.These electrical components are part of the VIPower? series.This case results in a 3.5A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.A maximum supply voltage of 36V is set in Vsup.This part is powered by 8/36V.For maximum efficiency, the supply voltage should be set to 13V.
VND810SP-E Features
Supplied from 13V
VND810SP-E Applications
There are a lot of STMicroelectronics VND810SP-E Power Switches ICs applications.
- HDD and SSD
- Wireless/Networking Cards
- Smart Phones, Feature Phones
- Set-Top Boxes
- Various applications equipped with buttons
- Portable Devices
- Portable GPS Device
- Low Voltage I/O System Power
- Portable Music Players
- Portable Video Game Players
