banner_page

VND810SP13TR

8/36V N-Channel PMIC VIPower? Series VND810 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND810SP13TR
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 322
  • Description: 8/36V N-Channel PMIC VIPower? Series VND810 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series VIPower™
JESD-609 Code e3
Feature Auto Restart, Status Flag
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Resistance 160mOhm
Terminal Finish Matte Tin (Sn)
Subcategory Peripheral Drivers
Max Power Dissipation 52W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Base Part Number VND810
Pin Count 10
Number of Outputs 2
Output Type N-Channel
Max Output Current 5A
Operating Supply Voltage 41V
Supply Voltage-Max (Vsup) 36V
Power Supplies 8/36V
Interface On/Off
Current - Output (Max) 3.5A
Nominal Supply Current 12μA
Output Configuration High Side
Power Dissipation 52W
Output Current 5A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output Peak Current Limit-Nom 5A
Rds On (Typ) 160m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.75mm
Length 9.4mm

VND810SP13TR Overview


The package is in the form of a Tape & Reel (TR).It's included in the PowerSO-10 Exposed Bottom Pad package.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.The VND810 family consists of this type.It consists of 10 terminations in total.10 pins are used for operation.It is important to note that the LED driving board has 1 functions.The LED driver output is limited to 3.5AV.This results in the maximum output current dropping to 5A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.There are 10 pins in total on this board.In this case, there is 160mOhm resistance in the LED driving board.The VIPower? series includes this electrical component.This results in a 5A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).It has a power supply of 8/36V.In order to maximize efficiency, the supply voltage should be set at 41V.

VND810SP13TR Features


Supplied from 13V
Resistance of 160mOhm

VND810SP13TR Applications


There are a lot of STMicroelectronics VND810SP13TR Power Switches ICs applications.

  • Solid-State Drives
  • Storage (HDDs, SSDs)
  • Hot Swaps
  • USB Ports/Hubs
  • HDD, SSD
  • Various applications equipped with buttons
  • Mobile Communication Devices
  • Storage Drives
  • PC Card Hot Swap
  • PDAs

Write a review

Note: HTML is not translated!
    Bad           Good