Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSO-10 Exposed Bottom Pad |
Number of Pins |
10 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
160mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
52W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Supply Voltage |
13V |
Base Part Number |
VND810 |
Pin Count |
10 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
3.5A |
Operating Supply Voltage |
13V |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Interface |
On/Off |
Nominal Supply Current |
12μA |
Output Configuration |
High Side |
Power Dissipation |
52W |
Output Current |
5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Driver Number of Bits |
2 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
5A |
Rds On (Typ) |
160m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height Seated (Max) |
3.75mm |
Length |
9.4mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VND810SPTR-E Overview
Tape & Reel (TR) is how it's packaged.In the PowerSO-10 Exposed Bottom Pad package, it is included.This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.It comes under the family of VND810.A total of 10 terminations have been found in it.The 10 pins are used for the operation of the system.Currently, there are 2 functions associated with the lighting driver.The maximum output current is reduced to 3.5A to meet the operation criteria.The supply voltage can be 13V for high efficiency.This lighting driver is mounted in the way of Surface Mount.A total of 10 pins are included in this LED driver.160mOhm is the resistance of the lighting driver.The VIPower? series includes this electrical component.When this is the case, the output current is set to 5A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Vsup (maximum supply voltage) is set to 36V.This part is powered by 8/36V.In order to maximize efficiency, the supply voltage should be set at 13V.
VND810SPTR-E Features
Supplied from 13V
Resistance of 160mOhm
VND810SPTR-E Applications
There are a lot of STMicroelectronics VND810SPTR-E Power Switches ICs applications.
- Wearable Devices
- PC Card Hot Swap
- Portable/Handheld Devices
- Notebook and Tablet Computers
- Storage Drives
- USB Power Distribution
- USB3.1 Power Delivery
- PDAs
- Storage (HDDs, SSDs)
- HDD, SSD