VND810TR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Base Part Number | VND810 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND810TR-E Overview
Tape & Reel (TR) is the way it's packaged.The 16-SOIC (0.154, 3.90mm Width) package includes it.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 2.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.There is a VND810 family of things that it belongs to.As a result, there are 16 terminations.The 16 pins are used for the operation of the system.There are 2 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 3.5A.As long as the supply voltage is 13V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.There are 16 pins in total on this board.These electrical components are part of the VIPower? series.As a result, the output current is set to 5A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The Vsup value (maximum supply voltage) is set to 36V.This part is powered by 8/36V.It is recommended to set the supply voltage to 13V for optimum efficiency.
VND810TR-E Features
Supplied from 13V
VND810TR-E Applications
There are a lot of STMicroelectronics VND810TR-E Power Switches ICs applications.
- Telecom and Network Systems
- Notebook and Tablet Computers
- Storage Drives
- Notebook PC
- Mobile Communication Devices
- USB Ports/Hubs
- Portable Video Game Players
- Portable GPS Device
- Portable Devices
- PDAs
