banner_page

VND830AEP-E

N-Channel PMIC VIPower? Series VND830 24 Pin 24-PowerBSOP (0.295, 7.50mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND830AEP-E
  • Package: 24-PowerBSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 160
  • Description: N-Channel PMIC VIPower? Series VND830 24 Pin 24-PowerBSOP (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-PowerBSOP (0.295, 7.50mm Width)
Number of Pins 24
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPower™
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
ECCN Code EAR99
Resistance 60mOhm
Max Power Dissipation 8.3W
Base Part Number VND830
Pin Count 24
Number of Outputs 2
Output Type N-Channel
Max Output Current 6A
Operating Supply Voltage 13V
Interface On/Off
Nominal Supply Current 7mA
Output Configuration High Side
Power Dissipation 8.3W
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 7mA
Input Type Non-Inverting
Turn On Delay Time 30 μs
Switch Type General Purpose
Turn-Off Delay Time 30 μs
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Rds On (Typ) 60m Ω (Max)
Height 2.4mm
Length 10.5mm
Width 7.6mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

VND830AEP-E Overview


The LED driver's packaged as a Tube.This package is included in 24-PowerBSOP (0.295, 7.50mm Width).The LED driver is mounted as Surface Mount.The switch type is General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.I believe it belongs to the VND830 family.In order to operate, the 24 pins are used.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 24 pins.In this case, there is 60mOhm resistance in the LED driving board.It belongs to the VIPower? series.A supply voltage of 13V is recommended for maximum efficiency.For its operation, a current of 7mA is required.

VND830AEP-E Features


Resistance of 60mOhm

VND830AEP-E Applications


There are a lot of STMicroelectronics VND830AEP-E Power Switches ICs applications.

  • PC Card Hot Swap
  • Portable Music Players
  • HDD and SSD
  • Notebook PC
  • USB3.1 Power Delivery
  • Solid-State Drives
  • Wireless Modem Data Cards
  • PDAs
  • Various applications equipped with buttons
  • Gaming

Write a review

Note: HTML is not translated!
    Bad           Good