VND830AEPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Max Power Dissipation | 8.3W |
| Base Part Number | VND830 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 7mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 60m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND830AEPTR-E Overview
Tape & Reel (TR) is the way it's packaged.In the 24-PowerBSOP (0.295, 7.50mm Width) package, it is included.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.It belongs to the VND830 family.During operation, the 24 pins are used.To comply with the operation criteria, the maximum output current is reduced to 6A.As a result, it is mounted in the manner of Surface Mount.A total of 24 pins are included in this LED driver.It has 60mOhm resistance.These electrical components are part of the VIPower? series.In order to maximize efficiency, the supply voltage should be set to 13V.It has a maximum current requirement of 7mA.
VND830AEPTR-E Features
Resistance of 60mOhm
VND830AEPTR-E Applications
There are a lot of STMicroelectronics VND830AEPTR-E Power Switches ICs applications.
- USB Protection
- Hot Swaps
- Set-Top Boxes
- Wireless Modem Data Cards
- Smartphone and PDA
- PDAs
- Various applications equipped with buttons
- Wireless/Networking Cards
- USB Power Distribution
- Portable GPS
