VND830E-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 65mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND830 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 9.5A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 13.5A |
| Rds On (Typ) | 65m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND830E-E Overview
Tube is the way it's packaged.It is included with the 16-SOIC (0.295, 7.50mm Width) package as well.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 2 outputs.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It has a total of Auto Restart features.It is a member of the VND830 family.It contains 16 terminations.The 16 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.In order to meet the operation criteria, the maximum output current drops to 9.5A.The supply voltage of 13V is conducive to high efficiency.It is positioned in the direction of Surface Mount.16 pins are connected to it in total.There is 65mOhm resistance on the LED driver.Electrical components such as this are included in the VIPower? series.In this case, the output current will be set to 9A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.For maximum efficiency, the supply voltage should be set to 36V.Voltage input is limited to 36V volts.As a minimum input voltage, it requires 5.5V volts.For its operation, a maximum current requirement of 12μA is required.
VND830E-E Features
Supplied from 13V
Resistance of 65mOhm
VND830E-E Applications
There are a lot of STMicroelectronics VND830E-E Power Switches ICs applications.
- PC Cards
- Smartphone and PDA
- Portable GPS
- Portable Music Players
- Wireless Headsets
- USB Power Distribution
- PC Card Hot Swap
- Portable Video Game Players
- Smart Phones, Feature Phones
- Hot Swap
