VND830ETR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 65mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND830 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 9.5A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 13.5A |
| Rds On (Typ) | 65m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND830ETR-E Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 16-SOIC (0.295, 7.50mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.By default, it is set to output 2.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Auto Restart.As you can see, it comes from the VND830 family.It consists of 16 terminations in total.The operation is performed through the 16 pins.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 9.5A.The supply voltage can be 13V for high efficiency.Surface Mount is mounted in the way.A total of 16 pins are included in this LED driver.The LED driver has 65mOhm resistance.It belongs to the VIPower? series.In this case, the output current will be set to 9A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to maximize efficiency, the supply voltage should be set to 36V.It has a maximum input voltage of 36V volts.It requires 5.5V volts as the minimum input voltage.It operates at a maximum current of 12μA.
VND830ETR-E Features
Supplied from 13V
Resistance of 65mOhm
VND830ETR-E Applications
There are a lot of STMicroelectronics VND830ETR-E Power Switches ICs applications.
- Wireless Headsets
- USB Power Distribution
- Portable/Handheld Devices
- Portable GPS Device
- Gaming
- Handheld Devices
- Hard Disk Drives
- Portable Devices
- Mobile Communication Devices
- Solid State Drivers
