banner_page

VND830LSP-E

N-Channel PMIC VIPower? Series VND830 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND830LSP-E
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 984
  • Description: N-Channel PMIC VIPower? Series VND830 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Max Power Dissipation 74W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 250
Number of Functions 2
Supply Voltage 13V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number VND830
Pin Count 10
Number of Outputs 2
Output Type N-Channel
Max Output Current 23A
Operating Supply Voltage 36V
Interface On/Off
Current - Output (Max) 18A
Nominal Supply Current 12μA
Output Configuration High Side
Power Dissipation 74W
Output Current 23A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 12μA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 36V
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output Peak Current Limit-Nom 23A
Rds On (Typ) 60m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.75mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPower™
JESD-609 Code e3
Feature Auto Restart
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Resistance 60mOhm

VND830LSP-E Overview


It's?packaged?in?the way?of?a?Tube.This file is included in package PowerSO-10 Exposed Bottom Pad.The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Auto Restart features.It is a member of the VND830 family.A total of 10 terminations can be found in it.In order to operate, the 10 pins are used.It contains 2 functions.The maximum output of the LED driving board is 18AV.To meet the operation criteria, the maximum output current drops to 23A.The supply voltage of 13V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.There are 10 pins in total on this board.Currently, the LED driving board has 60mOhm resistance.There is an electrical component included in the VIPower? series.The output current is set to 23A in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.It is recommended to set the supply voltage to 36V for optimum efficiency.This LED driver can handle voltages up to 36V volts.As far as input voltage goes, it has a minimum of 5.5V volts.For its operation, a maximum current requirement of 12μA is required.

VND830LSP-E Features


Supplied from 13V
Resistance of 60mOhm

VND830LSP-E Applications


There are a lot of STMicroelectronics VND830LSP-E Power Switches ICs applications.

  • Wireless/Networking Cards
  • Solid State Drivers
  • Hard Disk Drives
  • Portable/Handheld Devices
  • Low Voltage I/O System Power
  • USB3.1 Power Delivery
  • Notebook and Tablet Computers
  • Wireless Modem Data Cards
  • Portable GPS Device
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good