VND830LSP13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 74W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND830 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 23A |
| Operating Supply Voltage | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Current - Output (Max) | 18A |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 74W |
| Output Current | 23A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 23A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VND830LSP13TR Overview
Tape & Reel (TR) is how it's packaged.It is included in the package PowerSO-10 Exposed Bottom Pad.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 2 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Auto Restart features.I believe it belongs to the VND830 family.A total of 10 terminations can be found in it.The 10 pins are used for the operation of the system.It has 1 functions.There is a maximum output of 18AV from the LED driver.It is necessary to reduce the maximum output current to 23A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.There are 10 pins in total on this board.Currently, the LED driving board has a resistance of 60mOhm ohms.These electrical components are part of the VIPower? series.This case results in a 23A output current.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.This part is powered by 13V.For maximum efficiency, the supply voltage should be set to 36V.A maximum input voltage of 36V volts can be applied to it.The input voltage minimum is 5.5V volts.There is a maximum current requirement of 12μA for its operation.
VND830LSP13TR Features
Supplied from 13V
Resistance of 60mOhm
VND830LSP13TR Applications
There are a lot of STMicroelectronics VND830LSP13TR Power Switches ICs applications.
- Wireless Headsets
- USB3.1 Power Delivery
- Mobile Communication Devices
- PC Cards
- Notebook PC
- Wearable Devices
- Smart Phones, Feature Phones
- Set-Top Boxes
- Hot Swaps
- Various applications equipped with buttons
