VND830LSPTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 74W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Base Part Number | VND830 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 23A |
| Interface | On/Off |
| Current - Output (Max) | 18A |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 74W |
| Output Current | 23A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 23A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND830LSPTR-E Overview
The LED driver's packaged as a Tape & Reel (TR).This package is included in PowerSO-10 Exposed Bottom Pad.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.By default, it is set to output 2.With a supply voltage of Not Required, the LED driving board operates.Voltage output is N-Channel volts at maximum.A lighting driver with Auto Restart features is available.The VND830 family contains this object.In total, there are 10 terminations.The operation is performed through the 10 pins.As far as functions are concerned, the lighting driver has 2.This lighting driver is capable of delivering a maximum output of 18A volts.As a result, the maximum output current is reduced to 23A in order to meet the operation requirements.With a supply voltage of 13V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 10 pins.Currently, the LED driving board has a resistance of 60mOhm ohms.This electrical component can be found in the VIPower? series.When this case is used, the output current is set to 23A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.There is a maximum input voltage of 36V volts.There is a minimum input voltage of 5.5V volts.It requires 12μA current to operate.
VND830LSPTR-E Features
Supplied from 13V
Resistance of 60mOhm
VND830LSPTR-E Applications
There are a lot of STMicroelectronics VND830LSPTR-E Power Switches ICs applications.
- Wireless Headsets
- Storage (HDDs, SSDs)
- USB Power Distribution
- USB Protection
- Gaming
- Hot Swap
- Notebook PC
- Hot Swap
- Solid State Drivers
- Portable Music Players
