VND830MSP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 73.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND830 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 73.5W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND830MSP Overview
It is package in Tube case.It is included with the PowerSO-10 Exposed Bottom Pad package as well.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.As a default, the output is set to 2.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts.It has a total of Auto Restart features.There is a VND830 family of things that it belongs to.It has a total of 10 terminations.The operation is carried out using the 10 pins.As far as functions are concerned, the lighting driver has 1.Maximum output current falls to 6A when operation criteria are met.Using a voltage of 13V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 10 pins.A component of this type is included in the VIPower? series.As a result, the output current is set to 6A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this LED driver is 36V (Vsup).It has a power supply of 13V.In order to optimize the efficiency of the supply voltage, it should be set to 41V.
VND830MSP Features
Supplied from 13V
VND830MSP Applications
There are a lot of STMicroelectronics VND830MSP Power Switches ICs applications.
- Portable Video Game Players
- Portable Devices
- Solid-State Drives
- Wireless Modem Data Cards
- Hot Swap
- Smart Phones, Feature Phones
- USB Power Distribution
- Wireless/Networking Cards
- Wearable Devices
- Gaming
