VND830MSP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 73.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Base Part Number | VND830 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 73.5W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 60 μs |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Turn Off Time | 70 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 3.65mm |
| Length | 7.6mm |
| Width | 9.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND830MSP-E Overview
A Tube is used to package it.This file is included in package PowerSO-10 Exposed Bottom Pad.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.Features of the lighting driver are Auto Restart.It belongs to the VND830 family.The termination count is 10.The 10 pins are used to operate the LED driver.Currently, the lighting driver has a total of 2 functions.As a result, the maximum output current is reduced to 9A in order to meet the operation requirements.The supply voltage of 13V is conducive to high efficiency.The LED driving board is mounted in the way of Surface Mount.10 pins are connected to it in total.It has 60mOhm resistance.This electrical component can be found in the VIPower? series.In this case, the output current will be set to 6A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage is set to 36V.In order to maximize efficiency, the supply voltage should be set at 13V.
VND830MSP-E Features
Supplied from 13V
Resistance of 60mOhm
VND830MSP-E Applications
There are a lot of STMicroelectronics VND830MSP-E Power Switches ICs applications.
- Mobile Communication Devices
- Hot Swaps
- Wireless Modem Data Cards
- Hot-Swap Systems
- Portable Video Game Players
- Hot Swap
- Low Voltage I/O System Power
- USB Power Distribution
- Gaming
- Notebook and Tablet Computers
