VND830MSP13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 73.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND830 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 73.5W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND830MSP13TR Overview
It is packaged in the manner of a Tape & Reel (TR).Package PowerSO-10 Exposed Bottom Pad contains it.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There is a default setting of 2 for output.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.A lighting driver with Auto Restart features is available.The VND830 family contains this object.A total of 10 terminations have been recorded.The 10 pins are used for the operation of the system.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 9A.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 10 pins.Currently, the LED driving board has 60mOhm resistance.This electrical component can be found in the VIPower? series.This case results in a 6A output current.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).A 13V power supply is used by the part.In order to achieve the best efficiency, the supply voltage should be set to 41V.
VND830MSP13TR Features
Supplied from 13V
Resistance of 60mOhm
VND830MSP13TR Applications
There are a lot of STMicroelectronics VND830MSP13TR Power Switches ICs applications.
- Low Voltage I/O System Power
- Various applications equipped with buttons
- PDAs
- Hard Disk Drives
- Notebook and Tablet Computers
- Solid State Drivers
- Storage (HDDs, SSDs)
- Portable Music Players
- Gaming
- Wireless/Networking Cards
