banner_page

VND830MSPTR-E

N-Channel PMIC VIPower? Series VND830 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND830MSPTR-E
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 862
  • Description: N-Channel PMIC VIPower? Series VND830 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series VIPower™
JESD-609 Code e3
Feature Auto Restart
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Resistance 60mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Max Power Dissipation 73.5W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 250
Number of Functions 2
Supply Voltage 13V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number VND830
Pin Count 10
Number of Outputs 2
Output Type N-Channel
Max Output Current 9A
Operating Supply Voltage 13V
Supply Voltage-Max (Vsup) 36V
Interface On/Off
Nominal Supply Current 5mA
Output Configuration High Side
Power Dissipation 73.5W
Output Current 6A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Turn On Time 60 μs
Output Peak Current Limit-Nom 9A
Rds On (Typ) 60m Ω (Max)
Turn Off Time 70 μs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.65mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

VND830MSPTR-E Overview


As a result, it is packaged in the form of a Tape & Reel (TR).The PowerSO-10 Exposed Bottom Pad package includes it.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 2 outputs.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.There are Auto Restart features available on the LED driving board.This object belongs to the VND830 family.A total of 10 terminations have been recorded.The 10 pins are used to operate the LED driver.Currently, there are 2 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 9A.The supply voltage can be 13V for high efficiency.Surface Mount is mounted in the way of this lighting driver.10 pins are equipped with it.There is 60mOhm resistance on the LED driver.It is part of the VIPower? series.When this case is used, the output current is set to 6A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.A maximum supply voltage of 36V is set in Vsup.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.

VND830MSPTR-E Features


Supplied from 13V
Resistance of 60mOhm

VND830MSPTR-E Applications


There are a lot of STMicroelectronics VND830MSPTR-E Power Switches ICs applications.

  • Storage Drives
  • USB Protection
  • Wireless/Networking Cards
  • Smart Phones, Feature Phones
  • Wearable Devices
  • Portable/Handheld Devices
  • Solid-State Drives
  • Storage (HDDs, SSDs)
  • USB Ports/Hubs
  • Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good