Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-PowerBSOP (0.295, 7.50mm Width) |
Number of Pins |
24 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
54W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
13V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VND830 |
Pin Count |
24 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
6A |
Operating Supply Voltage |
13V |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Interface |
On/Off |
Nominal Supply Current |
7mA |
Output Configuration |
High Side |
Power Dissipation |
54W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
7mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
30 μs |
Switch Type |
General Purpose |
Turn-Off Delay Time |
30 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Driver Number of Bits |
2 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
9A |
Rds On (Typ) |
60m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Length |
10.3mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VND830PEP-E Overview
It is package in Tube case.There is a 24-PowerBSOP (0.295, 7.50mm Width) package that includes it.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 2 for output.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It has a total of Auto Restart features.The VND830 family contains this object.It contains 24 terminations.It is necessary to use the 24 pins in order to operate the LED driver.It is important to note that the LED driving board has 2 functions.In order to meet the operation criteria, the maximum output current drops to 6A.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 24 pins are present on it.There is an electrical component included in the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).This part is powered by 8/36V.In order to maximize efficiency, the supply voltage should be set to 13V.It operates at a maximum current of 7mA.
VND830PEP-E Features
Supplied from 13V
VND830PEP-E Applications
There are a lot of STMicroelectronics VND830PEP-E Power Switches ICs applications.
- Solid-State Drives
- Wireless Headsets
- Set-Top Boxes
- Smart Phones, Feature Phones
- Portable Music Players
- Storage Drives
- Portable Devices
- Wearable Devices
- Portable Video Game Players
- USB3.1 Power Delivery