VND830PEPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 54W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND830 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 7mA |
| Output Configuration | High Side |
| Power Dissipation | 54W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 7mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND830PEPTR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 24-PowerBSOP (0.295, 7.50mm Width) package, it is included.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver is equipped with 2 outputs.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.This object belongs to the VND830 family.There are 24 terminations in it.The 24 pins are used to operate the LED driver.The LED driving board has a total of 2 functions.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.High efficiency is possible at 13V supply voltage.The LED driving board is mounted in the way of Surface Mount.It is equipped with a total of 24 pins.This electrical component is included in the VIPower? series.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The maximum supply voltage for this LED driver is 36V (Vsup).The power supply of the part is 8/36V.When using this LED driving board, it is recommended that the supply voltage is set to 13V.For its operation, a current of 7mA is required.
VND830PEPTR-E Features
Supplied from 13V
VND830PEPTR-E Applications
There are a lot of STMicroelectronics VND830PEPTR-E Power Switches ICs applications.
- Wearable Devices
- Smartphone and PDA
- Wireless Headsets
- Set-Top Boxes
- Portable GPS
- Solid State Drivers
- Set-top-box
- Smart Phones, Feature Phones
- Portable Devices
- Storage (HDDs, SSDs)
