VND830PTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Max Power Dissipation | 8.3W |
| Base Part Number | VND830 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 7mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 60m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND830PTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the 16-SOIC (0.295, 7.50mm Width) package, it is included.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 2 outputs that can be used.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.It belongs to the family VND830.In order to operate, 16 pins are used.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.It is mounted in the way of Surface Mount.The LED driver has 60mOhm resistance.These electrical components are part of the VIPower? series.This results in a 6A output current.Voltage input is limited to 36V volts.As a minimum input voltage, it requires 5.5V volts.For its operation, a current of 7mA is required.
VND830PTR-E Features
Resistance of 60mOhm
VND830PTR-E Applications
There are a lot of STMicroelectronics VND830PTR-E Power Switches ICs applications.
- Notebook PC
- Handheld Devices
- USB Power Distribution
- Portable/Handheld Devices
- Storage Drives
- Hot Swap
- HDD, SSD
- USB3.1 Power Delivery
- USB Protection
- Wireless Modem Data Cards
