banner_page

VND830SP

13V N-Channel PMIC VIPower? Series VND830 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND830SP
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 664
  • Description: 13V N-Channel PMIC VIPower? Series VND830 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPower™
JESD-609 Code e3
Feature Auto Restart
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Resistance 60mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Max Power Dissipation 73.5W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Base Part Number VND830
Pin Count 10
Number of Outputs 2
Output Type N-Channel
Max Output Current 9A
Operating Supply Voltage 41V
Supply Voltage-Max (Vsup) 36V
Power Supplies 13V
Interface On/Off
Nominal Supply Current 12μA
Output Configuration High Side
Power Dissipation 73.5W
Output Current 9A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Output Current per Channel 6A
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output Peak Current Limit-Nom 9A
Rds On (Typ) 60m Ω (Max)
Drain to Source Resistance 120mOhm
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.75mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VND830SP Overview


As a result, it is packaged in the form of a Tube.In the PowerSO-10 Exposed Bottom Pad package, it is included.The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver has a total of 2 outputs that are available for use.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart features.I believe it belongs to the VND830 family.It contains 10 terminations.The 10 pins are used for the operation of the system.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 9A.The supply voltage can be 13V for high efficiency.In this case, it is mounted in the way of Surface Mount.As a result, it has a total of 10 pins.In this LED driving board, there is 60mOhm resistance.It is included in the VIPower? series.In this case, the output current is set to 9A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.Vsup (maximum supply voltage) is set to 36V.This part has a power supply of 13V volts.For maximum efficiency, the supply voltage should be set to 41V.

VND830SP Features


Supplied from 13V
Resistance of 60mOhm

VND830SP Applications


There are a lot of STMicroelectronics VND830SP Power Switches ICs applications.

  • Various applications equipped with buttons
  • PC Card Hot Swap
  • Portable Video Game Players
  • Smartphone and PDA
  • Wireless/Networking Cards
  • Portable GPS
  • Portable/Handheld Devices
  • Storage Drives
  • Portable Devices
  • Set-Top Boxes

Write a review

Note: HTML is not translated!
    Bad           Good