VND830SP-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 73.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Base Part Number | VND830 |
| Pin Count | 10 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 73.5W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 3.65mm |
| Length | 7.6mm |
| Width | 9.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND830SP-E Overview
Tube is the way it's packaged.The PowerSO-10 Exposed Bottom Pad package contains it.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.A lighting driver with Auto Restart features is available.The VND830 family consists of this type.It has a total of 10 terminations.10 pins are used for operation.Currently, the lighting driver has a total of 2 functions.The maximum output current is reduced to 9A to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.In this case, it is mounted in the way of Surface Mount.It is equipped with a total of 10 pins.Currently, the LED driving board has 60mOhm resistance.There is an electrical component included in the VIPower? series.The output current is set to 6A in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 36V (Vsup).In this case, the power supply is 8/36V.In order to maximize efficiency, the supply voltage should be set to 13V.A total of 2 drivers are included in this part.
VND830SP-E Features
Supplied from 13V
Resistance of 60mOhm
VND830SP-E Applications
There are a lot of STMicroelectronics VND830SP-E Power Switches ICs applications.
- USB Power Distribution
- Telecom and Network Systems
- Handheld Devices
- Storage Drives
- Wireless Headsets
- Storage (HDDs, SSDs)
- USB3.1 Power Delivery
- Smartphone and PDA
- Portable Music Players
- Portable Video Game Players
