Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSO-10 Exposed Bottom Pad |
Number of Pins |
10 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
60mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
7.35W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
13V |
Base Part Number |
VND830 |
Pin Count |
10 |
Output Type |
N-Channel |
Max Output Current |
9A |
Operating Supply Voltage |
13V |
Supply Voltage-Max (Vsup) |
36V |
Interface |
On/Off |
Nominal Supply Current |
12μA |
Output Configuration |
High Side |
Power Dissipation |
73.5W |
Output Current |
9A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Output Current per Channel |
6A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Number of Drivers |
2 |
Output Peak Current Limit-Nom |
9A |
Rds On (Typ) |
60m Ω (Max) |
Drain to Source Resistance |
120mOhm |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height Seated (Max) |
3.75mm |
Length |
9.4mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
VND830SP13TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The PowerSO-10 Exposed Bottom Pad package contains it.This lighting drivere has a mounting type of Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart features.This object belongs to the VND830 family.A total of 10 terminations have been found in it.10 pins are used for operation.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 9A in order to meet the operation criteria.High efficiency is possible at 13V supply voltage.The lighting driver is mounted in the direction of Surface Mount.A total of 10 pins are included in this LED driver.In this case, there is 60mOhm resistance in the LED driving board.This electrical component is included in the VIPower? series.When this is the case, the output current is set to 9A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.A maximum supply voltage of 36V is set in Vsup.When using this LED driving board, it is recommended that the supply voltage is set to 13V.A total of 2 drivers are included in the part.
VND830SP13TR Features
Supplied from 13V
Resistance of 60mOhm
VND830SP13TR Applications
There are a lot of STMicroelectronics VND830SP13TR Power Switches ICs applications.
- Wireless Modem Data Cards
- Low Voltage I/O System Power
- Solid State Drivers
- USB Ports/Hubs
- Portable GPS
- Portable Music Players
- Portable/Handheld Devices
- Notebook PC
- HDD, SSD
- PC Cards