Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSO-10 Exposed Bottom Pad |
Number of Pins |
10 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
60mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
73.5W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
2 |
Supply Voltage |
13V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VND830 |
Pin Count |
10 |
Output Type |
N-Channel |
Max Output Current |
9A |
Operating Supply Voltage |
13V |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Interface |
On/Off |
Nominal Supply Current |
5mA |
Output Configuration |
High Side |
Power Dissipation |
73.5W |
Output Current |
6A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
30 μs |
Switch Type |
General Purpose |
Output Current per Channel |
6A |
Nominal Input Voltage |
13V |
Turn-Off Delay Time |
30 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Number of Drivers |
2 |
Output Peak Current Limit-Nom |
9A |
Rds On (Typ) |
60m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height |
3.75mm |
Length |
9.4mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VND830SPTR-E Overview
Tape & Reel (TR) is how it's packaged.It's included in the PowerSO-10 Exposed Bottom Pad package.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Auto Restart features.It belongs to the VND830 family.It consists of 10 terminations in total.During operation, the 10 pins are used.It consists of 2 functions.To meet the operation criteria, the maximum output current drops to 9A.High efficiency is possible when the supply voltage is set to 13V.In this case, it is mounted in the way of Surface Mount.10 pins are equipped with it.It has a resistance of 60mOhm.This electrical component can be found in the VIPower? series.This case results in a 6A output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 36V.This part is powered by 8/36V.For maximum efficiency, the supply voltage should be set to 13V.A total of 2 drivers are included in the part.
VND830SPTR-E Features
Supplied from 13V
Resistance of 60mOhm
VND830SPTR-E Applications
There are a lot of STMicroelectronics VND830SPTR-E Power Switches ICs applications.
- USB Power Distribution
- USB Ports/Hubs
- Smart Phones, Feature Phones
- Wearable Devices
- USB3.1 Power Delivery
- PDAs
- Storage Drives
- Smartphone and PDA
- Storage (HDDs, SSDs)
- Hot-Swap Systems