VND830TR-E
| Parameters | |
|---|---|
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND830 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
VND830TR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 16-SOIC (0.295, 7.50mm Width) package.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.A lighting driver with Auto Restart features is available.The VND830 family consists of this type.A total of 16 terminations can be found in it.The 16 pins are used for the operation of the system.There are 2 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 6A.High efficiency is possible when the supply voltage is set to 13V.It is positioned in the direction of Surface Mount.There are 16 pins in total on this board.In this case, there is 60mOhm resistance in the LED driving board.There is an electrical component included in the VIPower? series.This case has the output current set to 9A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.It is recommended to set the supply voltage to 36V for optimum efficiency.It has a maximum input voltage of 36V volts.As far as input voltage goes, it has a minimum of 5.5V volts.This system has a maximum current requirement of 12μA.
VND830TR-E Features
Supplied from 13V
Resistance of 60mOhm
VND830TR-E Applications
There are a lot of STMicroelectronics VND830TR-E Power Switches ICs applications.
- HDD, SSD
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Hot Swap
- Mobile Communication Devices
- Gaming
- Set-top-box
- USB Power Distribution
- Solid-State Drives
- Low Voltage I/O System Power
