Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SOIC (0.295, 7.50mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
Feature |
Auto Restart |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
ECCN Code |
EAR99 |
Resistance |
16mOhm |
Max Power Dissipation |
6.25W |
Base Part Number |
VND920 |
Pin Count |
28 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
45A |
Operating Supply Voltage |
36V |
Interface |
On/Off |
Current - Output (Max) |
30A |
Nominal Supply Current |
5mA |
Output Configuration |
High Side |
Power Dissipation |
6.25W |
Output Current |
35A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
25mA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
5.5V |
Max Input Voltage |
36V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Rds On (Typ) |
16m Ω (Max) |
Drain to Source Resistance |
55mOhm |
Thickness |
2.65mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VND920 Overview
It is package in Tube case.This package is included in 28-SOIC (0.295, 7.50mm Width).The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 2 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Features of the lighting driver are Auto Restart.I believe it belongs to the VND920 family.For operation, we use the 28 pins.Its maximum output voltage is 30AV.This operation requires the maximum output current to be decreased to 45A.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 28 pins.16mOhm resistance is present in the lighting driver.This electrical component can be found in the VIPower? series.This case has the output current set to 35A.The supply voltage should be set at 36V for best efficiency.The maximum input voltage of the LED driver is 36V volts.A voltage of 5.5V volts is the minimum input voltage.A maximum current requirement of 25mA is required for its operation.
VND920 Features
Resistance of 16mOhm
VND920 Applications
There are a lot of STMicroelectronics VND920 Power Switches ICs applications.
- Various applications equipped with buttons
- Portable Devices
- Telecom and Network Systems
- PC Card Hot Swap
- USB Ports/Hubs
- Gaming
- Solid-State Drives
- PC Cards
- Handheld Devices
- Low Voltage I/O System Power