banner_page

VND92013TR

N-Channel PMIC VIPower? Series VND920 28 Pin 28-SOIC (0.295, 7.50mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND92013TR
  • Package: 28-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 153
  • Description: N-Channel PMIC VIPower? Series VND920 28 Pin 28-SOIC (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Operating Supply Voltage 36V
Number of Channels 2
Interface On/Off
Current - Output (Max) 30A
Nominal Supply Current 5mA
Output Configuration High Side
Power Dissipation 6.25W
Output Current 35A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 25mA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 36V
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Rds On (Typ) 16mOhm (Max)
Drain to Source Resistance 55mOhm
Thickness 2.65mm
RoHS Status ROHS3 Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295, 7.50mm Width)
Number of Pins 28
Supplier Device Package 28-SO
Operating Temperature -40°C~150°C TJ
Packaging Cut Tape (CT)
Series VIPower™
Feature Auto Restart
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 16mOhm
Max Operating Temperature 150°C
Min Operating Temperature -40°C
Max Power Dissipation 6.25W
Base Part Number VND920
Number of Outputs 2
Output Type N-Channel
Max Output Current 45A

VND92013TR Overview


It is package in Cut Tape (CT) case.In the 28-SOIC (0.295, 7.50mm Width) package, it is included.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 2 outputs.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.It comes under the family of VND920.28 pins are used for operation.The LED driver output is limited to 30AV.The maximum output current drops to 45A in order to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.In this case, there is 16mOhm resistance in the LED driving board.It belongs to the VIPower? series.In this case, the output current will be set to 35A.There are a total of 2 channels to choose from.For maximum efficiency, the supply voltage should be set to 36V.There is a maximum input voltage of 36V volts.A minimum input voltage of 5.5V volts is required for this LED driver.The maximum operating temperature of 150°C°C allows for stable operation.To ensure reliability, it should operate at -40°C degrees Celsius.A maximum current requirement of 25mA is required for its operation.

VND92013TR Features


Resistance of 16mOhm
2 channels

VND92013TR Applications


There are a lot of STMicroelectronics VND92013TR Power Switches ICs applications.

  • Set-Top Boxes
  • PDAs
  • USB Ports/Hubs
  • Wireless Headsets
  • USB Power Distribution
  • Low Voltage I/O System Power
  • Hard Disk Drives
  • Notebook PC
  • Handheld Devices
  • Notebook and Tablet Computers

Write a review

Note: HTML is not translated!
    Bad           Good