VND920PTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 16mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Base Part Number | VND920 |
| Pin Count | 28 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 30A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 16m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND920PTR-E Overview
A Tape & Reel (TR) is used to package it.This package is included in 28-SOIC (0.295, 7.50mm Width).The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 2.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Auto Restart.This object belongs to the VND920 family.As a result, there are 28 terminations.The 28 pins are used for the operation of the system.The LED driving board has a total of 2 functions.To meet the operation criteria, the maximum output current drops to 45A.The supply voltage of 13V is conducive to high efficiency.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 28 pins.In this LED driving board, there is 16mOhm resistance.This electrical component is included in the VIPower? series.The output current is set to 30A in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.When using this LED driving board, it is recommended that the supply voltage is set to 36V.This LED driving board can accept voltages up to 36V volts as an input.As a minimum input voltage, it requires 5.5V volts.
VND920PTR-E Features
Supplied from 13V
Resistance of 16mOhm
VND920PTR-E Applications
There are a lot of STMicroelectronics VND920PTR-E Power Switches ICs applications.
- Portable Devices
- Set-top-box
- Smartphone and PDA
- HDD, SSD
- Portable GPS Device
- Wireless Headsets
- USB Ports/Hubs
- Notebook PC
- Various applications equipped with buttons
- Gaming
