VND920TR-E
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 16mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VND920 |
| Pin Count | 28 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 15m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
VND920TR-E Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 28-SOIC (0.295, 7.50mm Width).In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.There is a default setting of 2 for output.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.A lighting driver with Auto Restart features is available.There is a VND920 family of things that it belongs to.It has a total of 28 terminations.The operation is performed through the 28 pins.It contains 2 functions.This operation requires the maximum output current to be decreased to 30A.High efficiency is possible at 13V supply voltage.Surface Mount is mounted in the way.A total of 28 pins are present on it.16mOhm is the resistance of the lighting driver.Electrical components such as this are included in the VIPower? series.This results in a 30A output current.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In order to maximize efficiency, the supply voltage should be set to 36V.Voltage input is limited to 36V volts.A voltage of 5.5V volts is the minimum input voltage.For its operation, a current of 5mA is required.
VND920TR-E Features
Supplied from 13V
Resistance of 16mOhm
VND920TR-E Applications
There are a lot of STMicroelectronics VND920TR-E Power Switches ICs applications.
- Set-Top Boxes
- Portable Devices
- Hard Disk Drives
- USB Protection
- Solid-State Drives
- PC Cards
- Storage Drives
- Wireless Headsets
- USB Power Distribution
- Handheld Devices
