VNH2SP30-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-MPSO, MultiPowerSO |
| Number of Pins | 30 |
| Manufacturer Package Identifier | MultiPowerSO-30 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | STripFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Automotive |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 5.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 9V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNH2SP |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Max Output Current | 30A |
| Supply Voltage-Max (Vsup) | 16V |
| Power Supplies | 9/16V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (2) |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 41V |
| Max Collector Current | 30A |
| Voltage - Load | 5.5V~16V |
| Switching Frequency | 20kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Height | 2.25mm |
| Length | 17.3mm |
| Width | 16.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNH2SP30-E Overview
The design contains a Tubepackage.30-MPSO, MultiPowerSOcases are included with the part.In most cases, it is recommended to mount the part at Surface Mount.The component connected in Automotiveis compatible with it.5.5V~16V volts can be supplied by the device.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.The motor type can be classified as Brushed DC.This part offers 30terminations.You can apply voltage at 5.5V~16Vto the load.Drivers controllers is important to remember that this amplifier should be run at 9V.Surface Mountis its recommended mounting method.There is an analog integrated circuit BRUSH DC MOTOR CONTROLLERpresent in the device.The VNH2SPpart number is used to locate the part.30pins are used in its design.Drivers controllers is a part of the Motion Control Electronics series.A total of 2outputs are available.Keeps the output voltage at STripFET?, VIPower?at all times.0 indicates that the motor type is [0].Its maximal output current reaches 30A to meet the operation requirements.
VNH2SP30-E Features
Applications : Automotive
Load voltage across the chip 5.5V~16V
base on VNH2SP number
designed with 2 outputs
Motor Type classified as Brushed
VNH2SP30-E Applications
There are a lot of STMicroelectronics VNH2SP30-E motor drivers applications.
- PWM generators
- Charge pump circuits
- Industrial high-bay lights
- Daytime running lights (DRLs)
- Running preventive- maintenance diagnostics
- LCD displays
- LED bias
- Lighting for health and wellbeing
- High brightness LED lighting
- Camcorders
