VNH5019A-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-PowerSOP (0.630, 16.00mm Width) |
| Number of Pins | 30 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | ECOPACK®, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Automotive |
| Technology | Power MOSFET |
| Voltage - Supply | 5.5V~24V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 3 |
| Base Part Number | VNH5019 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Interface | Parallel, PWM |
| Nominal Supply Current | 8mA |
| Output Configuration | Half Bridge (2) |
| Collector Emitter Voltage (VCEO) | 41V |
| Max Collector Current | 30A |
| Voltage - Load | 5.5V~24V |
| Output Peak Current Limit-Nom | 50A |
| Switching Frequency | 20kHz |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Motor Type | Brushed |
| Output Current Flow Direction | SOURCE SINK |
| Motor Type - AC, DC | Brushed DC |
| Height | 2.35mm |
| Length | 17.3mm |
| Width | 16.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNH5019A-E Overview
The design contains a Tubepackage.There is 30-PowerSOP (0.630, 16.00mm Width) case included with the part.Surface Mountshould be used for mounting the part.This component is suitable for the component connected to Automotive.There is a possibility of providing 5.5V~24Vvolts through the device.A range of -40°C~150°C TJis available for operating temperature.There is a motor type Brushed DCavailable.A total of 30terminations are available in the part.Drivers controllers is possible to apply voltage to the load at the rate of 5.5V~24V.I would like to remind you that this amplifier should be operated at 13V.Surface Mountis the recommended mounting method.As a result of the VNH5019part number, it can be found.There are 30 pins on it.Drivers controllers is possible to access 1outputs.Keeps the output voltage at ECOPACK?, VIPower?at all times.0 indicates that the motor type is [0].
VNH5019A-E Features
Applications : Automotive
Load voltage across the chip 5.5V~24V
base on VNH5019 number
designed with 1 outputs
Motor Type classified as Brushed
VNH5019A-E Applications
There are a lot of STMicroelectronics VNH5019A-E motor drivers applications.
- Dome
- LED bias
- Industrial lighting
- Tail lights
- Running preventive- maintenance diagnostics
- Turn signals
- Tunnel lights
- Commercial office
- CHMSL (center high-mount stop lamps)
- Accurate LED current matching
