VNI2140J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VNI2140 |
| Pin Count | 12 |
| Output Voltage | 45V |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 9/36V |
| Supply Voltage-Min (Vsup) | 9V |
| Interface | On/Off |
| Element Configuration | Dual |
| Nominal Supply Current | 1.9mA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 500mA |
| Rise Time | 10μs |
| Fall Time (Typ) | 8 μs |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9V~45V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 2 |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNI2140J Overview
The LED driver's packaged as a Tube.There is a package for it in the 12-PowerLSOP (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the VNI2140 family.It contains 12 terminations.For operation, 12 pins are used.Currently, the lighting driver has a total of 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.The supply voltage of 24V is conducive to high efficiency.It is mounted in the way of Surface Mount.A total of 12 pins are included in this LED driver.In this case, there is 80mOhm resistance in the LED driving board.As a result, the output current is set to 1A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage is set to 36V.For normal operation, the supply voltage (Vsup) should be kept above 9V.This part has a power supply of 9/36V.A total of 2 drivers are included in this part.
VNI2140J Features
Supplied from 24V
Resistance of 80mOhm
VNI2140J Applications
There are a lot of STMicroelectronics VNI2140J Power Switches ICs applications.
- USB Ports/Hubs
- Handheld Devices
- USB Power Distribution
- Hot-Swap Systems
- Telecom and Network Systems
- PC Cards
- Hot Swap
- Wireless Modem Data Cards
- Notebook PC
- Storage (HDDs, SSDs)
