Parameters |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
24V |
Terminal Pitch |
0.8mm |
Base Part Number |
VNI2140 |
Pin Count |
12 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
500mA |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
9/36V |
Supply Voltage-Min (Vsup) |
9V |
Interface |
On/Off |
Nominal Supply Current |
1.9mA |
Output Configuration |
High Side |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
9V~45V |
Driver Number of Bits |
2 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Rds On (Typ) |
80m Ω |
Built-in Protections |
TRANSIENT; THERMAL; UNDER VOLTAGE |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSSO-12 |
Number of Pins |
12 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
12 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
VNI2140JTR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The PowerSSO-12 package contains it.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.It comes under the family of VNI2140.It contains 12 terminations.For operation, 12 pins are used.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 500mA.Supply voltages of 24V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.A total of 12 pins are present on it.In this case, the output current is set to 500mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The LED driver is configured with a maximum supply voltage of 36V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 9V.This part has a power supply of 9/36V volts.
VNI2140JTR Features
Supplied from 24V
VNI2140JTR Applications
There are a lot of STMicroelectronics VNI2140JTR Power Switches ICs applications.
- Hot Swap
- USB Power Distribution
- PDAs
- Hard Disk Drives
- Hot Swaps
- Smart Phones, Feature Phones
- Wearable Devices
- Portable Video Game Players
- Wireless Modem Data Cards
- Solid State Drivers