VNI4140K-32
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Depth | 7.6mm |
| Current Rating | 1.6A |
| Base Part Number | VNI4140 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Interface | On/Off |
| Nominal Supply Current | 2.4mA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 52V |
| Output Current per Channel | 1A |
| Rise Time | 5μs |
| Fall Time (Typ) | 5 μs |
| Turn-Off Delay Time | 12 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Number of Drivers | 4 |
| Rds On (Typ) | 80m Ω (Max) |
| Drain to Source Resistance | 80mOhm |
| Height | 2.4mm |
| Length | 10.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNI4140K-32 Overview
It's?packaged?in?the way?of?a?Tube.In the 24-PowerBSOP (0.295, 7.50mm Width) package, it is included.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driving board operates at Not Required volts.The maximum output voltage is N-Channel volts.Features of the lighting driver are Status Flag.I believe it belongs to the VNI4140 family.In total, there are 24 terminations.24 pins are used for operation.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 24V.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has a resistance of 80mOhm ohms.A component of this type is included in the VIPower? series.In this case, the output current is set to 1A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.It is equipped with 4 drivers.
VNI4140K-32 Features
Supplied from 24V
Resistance of 80mOhm
VNI4140K-32 Applications
There are a lot of STMicroelectronics VNI4140K-32 Power Switches ICs applications.
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Various applications equipped with buttons
- Notebook and Tablet Computers
- Storage Drives
- Notebook PC
- Solid State Drivers
- Solid-State Drives
- Portable Music Players
- Portable Video Game Players
