VNI4140K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VNI4140 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 10.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Nominal Supply Current | 2.4mA |
| Output Configuration | High Side |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 700mA |
| Collector Emitter Voltage (VCEO) | 41V |
| Max Collector Current | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 1.3A |
| Rds On (Typ) | 80m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 2.4mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNI4140K Overview
The LED driver's packaged as a Tube.The 24-PowerBSOP (0.295, 7.50mm Width) package contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.There is a default setting of 4 for output.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.The VNI4140 family consists of this type.It contains 24 terminations.During operation, the 24 pins are used.It is important to note that the LED driving board has 4 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 24V.Surface Mount is mounted in the way.A total of 24 pins are included in this LED driver.Currently, the LED driving board has a resistance of 80mOhm ohms.This electrical component is part of the VIPower? series.This case has the output current set to 700mA.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 10.5V.The total number of channels is 2.
VNI4140K Features
Supplied from 24V
Resistance of 80mOhm
2 channels
VNI4140K Applications
There are a lot of STMicroelectronics VNI4140K Power Switches ICs applications.
- Smart Phones, Feature Phones
- HDD, SSD
- Low Voltage I/O System Power
- Hot Swap
- USB3.1 Power Delivery
- USB Protection
- Handheld Devices
- Portable Video Game Players
- USB Power Distribution
- Hot Swaps
