VNI4140KTR-32
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-BSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Termination | Gull Wing |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VNI4140 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Interface | On/Off |
| Nominal Supply Current | 2.4mA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Current | 10mA |
| Rds On (Typ) | 80m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNI4140KTR-32 Overview
It is packaged in the form of a Tape & Reel (TR).There is a package for it in the 24-BSOP (0.295, 7.50mm Width) Exposed Pad package.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The lighting driver has a total of 4 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Status Flag features.It is a member of the VNI4140 family.A total of 24 terminations can be found in it.24 pins are used for operation.The maximum output current drops to 1A in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 24V.This lighting driver is mounted in the way of Surface Mount.The VIPower? series includes this electrical component.It is set to 1A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.
VNI4140KTR-32 Features
Supplied from 24V
VNI4140KTR-32 Applications
There are a lot of STMicroelectronics VNI4140KTR-32 Power Switches ICs applications.
- Wireless Modem Data Cards
- USB Power Distribution
- Set-top-box
- Hot Swap
- Wearable Devices
- Hot-Swap Systems
- PC Card Hot Swap
- Portable Devices
- PC Cards
- Hard Disk Drives
