VNI4140KTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Termination | Gull Wing |
| ECCN Code | EAR99 |
| Resistance | 80MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Current Rating | 1A |
| Base Part Number | VNI4140 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Min (Vsup) | 10.5V |
| Interface | On/Off |
| Nominal Supply Current | 2.4mA |
| Output Configuration | High Side |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 1.3A |
| Rds On (Typ) | 80m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNI4140KTR Overview
It is package in Tape & Reel (TR) case.There is a package for it in the 24-PowerBSOP (0.295, 7.50mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver has 4 outputs.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Status Flag features.This object belongs to the VNI4140 family.The termination count is 24.During operation, the 24 pins are used.As far as the lighting driver is concerned, there are 4 functions.This operation requires the maximum output current to be decreased to 700mA.It is possible to obtain high efficiency with a supply voltage of 24V.This lighting driver is mounted in the way of Surface Mount.24 pins are equipped with it.There is 80MOhm resistance on the LED driver.This electrical component can be found in the VIPower? series.In this case, the output current will be set to 700mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.For normal operation, the supply voltage (Vsup) should be kept above 10.5V.
VNI4140KTR Features
Supplied from 24V
Resistance of 80MOhm
VNI4140KTR Applications
There are a lot of STMicroelectronics VNI4140KTR Power Switches ICs applications.
- PC Card Hot Swap
- HDD, SSD
- Mobile Communication Devices
- USB Ports/Hubs
- USB3.1 Power Delivery
- Smartphone and PDA
- Wireless/Networking Cards
- USB Power Distribution
- Hot Swaps
- PDAs
