VNI8200XP
| Parameters | |
|---|---|
| Feature | Power Good, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNI8200 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Operating Supply Voltage | 36V |
| Voltage | 45V |
| Interface | SPI |
| Nominal Supply Current | 5.6mA |
| Current | 700mA |
| Output Configuration | High Side |
| Output Current | 700mA |
| Max Supply Current | 5.6mA |
| Switch Type | General Purpose |
| Nominal Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~36V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 110m Ω |
| Height | 2.4mm |
| Length | 10.5mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-PowerBFSOP (0.295, 7.50mm Width) |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
VNI8200XP Overview
It is package in Tube case.This file is included in package 36-PowerBFSOP (0.295, 7.50mm Width).The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.In this LED driver, there are no outputs available.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There are Power Good, Status Flag features available on the LED driving board.The VNI8200 family contains this object.It consists of 36 terminations in total.The operation is carried out using the 36 pins.The LED driving board has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 700mA.High efficiency is possible when the supply voltage is set to 24V.It is positioned in the direction of Surface Mount.There are 36 pins in total on this board.The LED driver has 110mOhm resistance.This electrical component can be found in the VIPower? series.This case results in a 700mA output current.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Optimal efficiency requires a voltage of 36V.There is a maximum current requirement of 5.6mA for its operation.
VNI8200XP Features
Supplied from 24V
Resistance of 110mOhm
VNI8200XP Applications
There are a lot of STMicroelectronics VNI8200XP Power Switches ICs applications.
- Hard Disk Drives
- USB Power Distribution
- HDD and SSD
- Hot Swaps
- Notebook and Tablet Computers
- Various applications equipped with buttons
- Portable Video Game Players
- PDAs
- Wearable Devices
- Portable Music Players
