VNI8200XPTR
| Parameters | |
|---|---|
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~36V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 110m Ω |
| Height | 2.4mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-PowerBFSOP (0.295, 7.50mm Width) |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Power Good, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | VNI8200 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Operating Supply Voltage | 36V |
| Voltage | 45V |
| Interface | SPI |
| Nominal Supply Current | 5.6mA |
| Current | 700mA |
| Output Configuration | High Side |
| Output Current | 2μA |
| Max Supply Current | 5.6mA |
| Turn On Delay Time | 5 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 36V |
| Turn-Off Delay Time | 10 μs |
VNI8200XPTR Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the 36-PowerBFSOP (0.295, 7.50mm Width) package as well.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.It is possible to use 8 outputs in the lighting driver.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Power Good, Status Flag features.I believe it belongs to the VNI8200 family.It has a total of 36 terminations.The operation is carried out using the 36 pins.The LED driver has 1 functions.In order to meet the operation criteria, the maximum output current drops to 700mA.The supply voltage can be 24V for high efficiency.It is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 36 pins.The LED driver has 200mOhm resistance.It is part of the VIPower? series.The output current is set to 2μA in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In order to maximize efficiency, the supply voltage should be set at 36V.5.6mA is the maximum current required to operate it.
VNI8200XPTR Features
Supplied from 24V
Resistance of 200mOhm
VNI8200XPTR Applications
There are a lot of STMicroelectronics VNI8200XPTR Power Switches ICs applications.
- Portable GPS
- Portable Music Players
- Hot-Swap Systems
- HDD and SSD
- Smart Phones, Feature Phones
- Hard Disk Drives
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- USB Protection
- Portable/Handheld Devices
