VNL5050N3TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET III™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.3mm |
| Base Part Number | VNL5050 |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-G3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 30μA |
| Output Configuration | Low Side |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~5.5V |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Rise Time | 10μs |
| Fall Time (Typ) | 10 μs |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Max Junction Temperature (Tj) | 150°C |
| On-State Resistance | 50mOhm |
| Height | 1.9mm |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNL5050N3TR-E Overview
A Tape & Reel (TR) is used to package it.In the TO-261-4, TO-261AA package, it is included.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 1 for output.The LED driving board operates at 3.5V~5.5V volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Auto Restart.It is part of the VNL5050 family of LED drivers.It consists of 3 terminations in total.It has 1 functions.Maximum output current falls to 19A when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way.4 pins are connected to it in total.These electrical components are part of the OMNIFET III?, VIPower? series.In this case, the output current is set to 19A.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.In order to optimize the efficiency of the supply voltage, it should be set to 5V.
VNL5050N3TR-E Features
Supplied from 5V
1 channels
VNL5050N3TR-E Applications
There are a lot of STMicroelectronics VNL5050N3TR-E Power Switches ICs applications.
- PDAs
- USB Power Distribution
- Mobile Communication Devices
- Wearable Devices
- USB3.1 Power Delivery
- HDD and SSD
- Wireless/Networking Cards
- Smartphone and PDA
- PC Card Hot Swap
- Low Voltage I/O System Power
