VNL5050S5-E
| Parameters | |
|---|---|
| Series | OMNIFET III™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | VNL5050 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 25μA |
| Output Configuration | Low Side |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~5.5V |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Nominal Input Voltage | 5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
VNL5050S5-E Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.By default, it is set to output 1.The LED driving board is powered by a voltage of 3.5V~5.5V.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Auto Restart, Status Flag features.It comes under the family of VNL5050.There are 8 terminations in it.For operation, we use the 8 pins.The LED driver has 1 functions.The maximum output current drops to 27A in order to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.The lighting driver is mounted in the way of Surface Mount.A total of 8 pins are present on it.Lighting drivers with 50mOhm resistance are used.It is part of the OMNIFET III?, VIPower? series.When this is the case, the output current is set to 19A.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.
VNL5050S5-E Features
Supplied from 5V
Resistance of 50mOhm
1 channels
VNL5050S5-E Applications
There are a lot of STMicroelectronics VNL5050S5-E Power Switches ICs applications.
- Solid State Drivers
- Wireless Headsets
- Wearable Devices
- Hard Disk Drives
- USB3.1 Power Delivery
- Wireless Modem Data Cards
- Various applications equipped with buttons
- HDD, SSD
- Storage Drives
- USB Ports/Hubs
