VNL5160N3TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET III™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.3mm |
| Base Part Number | VNL5160 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 25μA |
| Output Configuration | Low Side |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~5.5V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 8.9 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 13.2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNL5160N3TR-E Overview
It is packaged in the form of a Tape & Reel (TR).The TO-261-4, TO-261AA package includes it.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of 3.5V~5.5V.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Auto Restart features in order for it to be useful.This object belongs to the VNL5160 family.A total of 4 terminations have been found in it.In order to operate, the 4 pins are used.It has 1 functions.The maximum output current must drop to 5A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.It is positioned in the direction of Surface Mount.The LED driver has a total of 4 pins.160mOhm resistance is present in the lighting driver.The OMNIFET III?, VIPower? series includes this electrical component.It is set to 3.5A in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.There is a voltage supply of 5V volts on this part.
VNL5160N3TR-E Features
Supplied from 5V
Resistance of 160mOhm
VNL5160N3TR-E Applications
There are a lot of STMicroelectronics VNL5160N3TR-E Power Switches ICs applications.
- USB3.1 Power Delivery
- Hot-Swap Systems
- Mobile Communication Devices
- PDAs
- Smart Phones, Feature Phones
- Portable Music Players
- Various applications equipped with buttons
- Portable GPS Device
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
