VNL5160S5-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tube |
| Series | OMNIFET III™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNL5160 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3.5V |
| Nominal Supply Current | 25μA |
| Output Configuration | Low Side |
| Output Current | 3.5A |
| Input Type | Non-Inverting |
| Output Current per Channel | 3.5A |
| Voltage - Load | 3.5V~5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 160m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNL5160S5-E Overview
The LED driver's packaged as a Tube.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.It is recommended to set the temperature to -40°C~150°C in order to ensure reliable operation.There are 1 outputs available on this lighting driver.This object belongs to the VNL5160 family.It has a total of 8 terminations.The 8 pins are used for the operation of the system.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 5A in order to meet the operation requirements.Using a voltage of 5V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.There are 8 pins in total on this board.The LED driver has 160mOhm resistance.Electrical components such as this are included in the OMNIFET III?, VIPower? series.The output current is set to 3.5A in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In this case, Vsup (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 3.5V.In this case, the power supply is 5V.BUFFER OR INVERTER BASED PERIPHERAL DRIVER is the type of interface to the LED driver.
VNL5160S5-E Features
Supplied from 5V
Resistance of 160mOhm
VNL5160S5-E Applications
There are a lot of STMicroelectronics VNL5160S5-E Power Switches ICs applications.
- HDD and SSD
- Storage (HDDs, SSDs)
- Solid State Drivers
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- Solid-State Drives
- USB Protection
- Portable GPS
- Portable/Handheld Devices
