VNL5160S5TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET III™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNL5160 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3.5V |
| Interface | On/Off |
| Nominal Supply Current | 25μA |
| Output Configuration | Low Side |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
VNL5160S5TR-E Overview
It is packaged in the manner of a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 1 outputs available on this lighting driver.It uses a supply voltage of 3.5V~5.5V to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.It belongs to the family VNL5160.A total of 8 terminations have been recorded.During operation, the 8 pins are used.The LED driver has 1 functions.The maximum output current is reduced to 5A to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 8 pins.160mOhm is the resistance of the lighting driver.It is part of the OMNIFET III?, VIPower? series.The output current is set to 3.5A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.Vsup (maximum supply voltage) is set to 5.5V.The supply voltage (Vsup) should be kept above 3.5V for normal operation.It has a power supply of 5V.
VNL5160S5TR-E Features
Supplied from 5V
Resistance of 160mOhm
VNL5160S5TR-E Applications
There are a lot of STMicroelectronics VNL5160S5TR-E Power Switches ICs applications.
- Portable Devices
- USB Protection
- Handheld Devices
- Wearable Devices
- Portable Music Players
- Set-Top Boxes
- PDAs
- Hard Disk Drives
- Storage Drives
- Portable Video Game Players
