VNL5300S5-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET III™, VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | VNL5300 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3.5V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3.5V~5.5V |
| Max Supply Current | 25A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 8 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 12 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Number of Drivers | 1 |
| Rds On (Typ) | 300m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VNL5300S5-E Overview
As you can see, it's packaged in the way of a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driving board is powered by a voltage of 3.5V~5.5V.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Auto Restart, Status Flag.It comes under the family of VNL5300.There are 8 terminations in it.The operation is performed through the 8 pins.There are 1 functions of the LED driver.This results in the maximum output current dropping to 2A to meet the operation criteria.Supply voltages of 5V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.It belongs to the OMNIFET III?, VIPower? series.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3.5V.There is a maximum current requirement of 25A for its operation.It is equipped with 1 drivers.
VNL5300S5-E Features
Supplied from 5V
VNL5300S5-E Applications
There are a lot of STMicroelectronics VNL5300S5-E Power Switches ICs applications.
- Wireless Modem Data Cards
- USB Power Distribution
- Portable GPS Device
- Portable Devices
- Hard Disk Drives
- HDD, SSD
- Low Voltage I/O System Power
- Portable Music Players
- PC Card Hot Swap
- Portable Video Game Players
