banner_page

VNLD5090TR-E

N-Channel PMIC OMNIFET III?, VIPower? Series VNLD5090 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VNLD5090TR-E
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 976
  • Description: N-Channel PMIC OMNIFET III?, VIPower? Series VNLD5090 8 Pin 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Cut Tape (CT)
Series OMNIFET III™, VIPower™
Feature Auto Restart, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 5V
Base Part Number VNLD5090
Number of Outputs 2
Output Type N-Channel
Max Output Current 13A
Supply Voltage-Min (Vsup) 4.5V
Interface On/Off
Output Configuration Low Side
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 65μA
Input Type Non-Inverting
Switch Type General Purpose
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 36V Max
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO
Screening Level AEC-Q100
Rds On (Typ) 90m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Output Current Flow Direction SINK
Height Seated (Max) 1.75mm
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VNLD5090TR-E Overview


It is package in Cut Tape (CT) case.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.There are Auto Restart, Status Flag features available on the LED driving board.It is a member of the VNLD5090 family.A total of 8 terminations have been recorded.The operation is carried out using the 8 pins.It consists of 2 functions.To comply with the operation criteria, the maximum output current is reduced to 13A.It is possible to achieve a high level of efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.It is part of the OMNIFET III?, VIPower? series.In order to operate normally, the supply voltage (Vsup) must remain above 4.5V.For its operation, a current of 65μA is required.

VNLD5090TR-E Features


Supplied from 5V

VNLD5090TR-E Applications


There are a lot of STMicroelectronics VNLD5090TR-E Power Switches ICs applications.

  • Hot Swaps
  • Smartphone and PDA
  • Telecom and Network Systems
  • Solid-State Drives
  • Hot Swap
  • Various applications equipped with buttons
  • Notebook and Tablet Computers
  • Hard Disk Drives
  • Hot-Swap Systems
  • Notebook PC

Write a review

Note: HTML is not translated!
    Bad           Good