Parameters |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lifecycle Status |
PREVIEW (Last Updated: 8 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET III™, VIPower™ |
Feature |
Auto Restart, Status Flag |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
VNLD5300 |
Output Type |
N-Channel |
Max Output Current |
2A |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
4.5V |
Interface |
On/Off |
Output Configuration |
Low Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
65μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
Number of Drivers |
2 |
Rds On (Typ) |
300m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Output Current Flow Direction |
SINK |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
VNLD5300-E Overview
It is package in Tube case.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.It is equipped with Auto Restart, Status Flag features.The VNLD5300 family contains this object.In total, there are 8 terminations.During operation, the 8 pins are used.As far as functions are concerned, the lighting driver has 1.As a result, the maximum output current is reduced to 2A in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 5V.It is positioned in the direction of Surface Mount.There is an electrical component included in the OMNIFET III?, VIPower? series.The maximum supply voltage is set to 5.5V.Normal operation requires a voltage above 4.5V for the supply voltage.It requires 65μA current to operate.There are 2 drivers associated with the part.
VNLD5300-E Features
Supplied from 5V
VNLD5300-E Applications
There are a lot of STMicroelectronics VNLD5300-E Power Switches ICs applications.
- Low Voltage I/O System Power
- Portable Devices
- Notebook PC
- Hot Swap
- Wireless/Networking Cards
- Solid-State Drives
- Mobile Communication Devices
- Handheld Devices
- USB Power Distribution
- Gaming