VNN1NV04PTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 7W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNN1NV |
| Pin Count | 4 |
| Output Voltage | 36V |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Voltage | 40V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Current | 1.7A |
| Output Configuration | Low Side |
| Power Dissipation | 7W |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 ns |
| Switch Type | General Purpose |
| Output Current per Channel | 1.7A |
| Rise Time | 170ns |
| Drain to Source Voltage (Vdss) | 45V |
| Fall Time (Typ) | 200 ns |
| Turn-Off Delay Time | 350 ns |
| Continuous Drain Current (ID) | 1.7A |
| Threshold Voltage | 500mV |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 45V |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 250m Ω (Max) |
| Drain to Source Resistance | 250mOhm |
| Turn Off Time | 5.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Nominal Vgs | 500 mV |
| Height | 1.9mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNN1NV04PTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package TO-261-4, TO-261AA.It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.The VNN1NV family contains this object.There are 4 terminations in it.The 4 pins are used to operate the LED driver.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 3.5A in order to meet the operation requirements.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driving board is mounted in the way of Surface Mount.A total of 4 pins are included in this LED driver.There is 250mOhm resistance on the LED driver.There is an electrical component included in the OMNIFET II?, VIPower? series.This case has the output current set to 1.7A.A total of 1 drivers are included in the part.
VNN1NV04PTR-E Features
Supplied from 5V
Resistance of 250mOhm
VNN1NV04PTR-E Applications
There are a lot of STMicroelectronics VNN1NV04PTR-E Power Switches ICs applications.
- Smart Phones, Feature Phones
- Handheld Devices
- Wireless Headsets
- HDD and SSD
- USB Power Distribution
- Storage Drives
- Gaming
- USB Power Distribution
- PC Cards
- Set-Top Boxes
