VNN1NV04TR-E
| Parameters | |
|---|---|
| Power Dissipation | 7W |
| Output Current | 2.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.7A |
| Drain to Source Voltage (Vdss) | 223V |
| Continuous Drain Current (ID) | 1.8A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Rds On (Typ) | 250mOhm (Max) |
| Drain to Source Resistance | 250mOhm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 3 |
| Supplier Device Package | SOT-223 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 250mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 7W |
| Base Part Number | VNN1NV |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Interface | On/Off |
| Current - Output (Max) | 1.7A |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
VNN1NV04TR-E Overview
Tape & Reel (TR) is how it's packaged.This package is included in TO-261-4, TO-261AA.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.It comes under the family of VNN1NV.It is necessary to use the 3 pins in order to operate the LED driver.The LED driver output is limited to 1.7AV.As a result, the maximum output current is reduced to 3.5A in order to meet the operation requirements.Surface Mount is mounted in the way.250mOhm resistance is present in the lighting driver.There is an electrical component included in the OMNIFET II?, VIPower? series.This results in a 2.6A output current.In order to ensure stable operation, a maximum operating temperature of 150°C°C should be maintained.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.
VNN1NV04TR-E Features
Resistance of 250mOhm
VNN1NV04TR-E Applications
There are a lot of STMicroelectronics VNN1NV04TR-E Power Switches ICs applications.
- Handheld Devices
- Smart Phones, Feature Phones
- Wireless Headsets
- Portable GPS Device
- USB Ports/Hubs
- Mobile Communication Devices
- PC Cards
- HDD and SSD
- USB Protection
- Solid-State Drives
