VNN3NV0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Voltage - Rated DC | 40V |
| Max Power Dissipation | 35W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Current Rating | 3.5A |
| Base Part Number | VNN3NV |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 6.8V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 7W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Switch Type | General Purpose |
| Rise Time | 250ns |
| Fall Time (Typ) | 250 ns |
| Turn-Off Delay Time | 450 ns |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNN3NV0413TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package TO-261-4, TO-261AA.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The VNN3NV family consists of this type.A total of 4 terminations have been recorded.The 4 pins are used for the operation of the system.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 3.5A.In this case, it is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 4 pins.Electrical components such as this are included in the OMNIFET II?, VIPower? series.The output current is set to 3.5A in this case.It is recommended to set the supply voltage to 6.8V for optimum efficiency.
VNN3NV0413TR Features
VNN3NV0413TR Applications
There are a lot of STMicroelectronics VNN3NV0413TR Power Switches ICs applications.
- Portable GPS Device
- Portable Music Players
- Wireless Headsets
- Handheld Devices
- Portable Video Game Players
- USB3.1 Power Delivery
- Mobile Communication Devices
- Wireless/Networking Cards
- USB Power Distribution
- Hot Swaps
